Product Features

Installation Method

1. First, press the pulley panel against the location where you want to install it, then use a marker to make marks along the screw holes in sequence.
2. Use an impact drill to drill holes at the marked positions. Note that the size of the drill bit must match the size of the expansion tube.
3. For other detailed steps, please refer to the schematic instruction manual.

Notes

1. You can install this product on a 2×4 wooden beam as shown in the diagram, then fix the 2×4 beam to the joists; alternatively, you can install the product directly onto the joists.
2. The straps included in the set are only suitable for kayaks. If you need to secure a roof box, you must purchase compatible straps separately.